0534-5621500

WS-3200 Mobile self loading Concrete mixer

Parameters




diesel engine

Model: YN33GBZ Total displacement - Number of cylinders: 3860 milliliters -4-cylinder inline

Injection: direct injection, mechanically controlled cooling: water cooling, dry air filter

Maximum power: 65 kW (106 horsepower) Maximum torque: 357 Nm 1800 rpm

electrical system

Generator: 28V-750WA100AH (550A) Battery: 2 * 12V - (272A)

turn

Two wheel steering, assisted by a double displacement load sensing power steering system on both steering wheels, with articulated steering.

4 * 4 Four-wheel drive

Torque converter gearbox, open hydraulic gear pump, reverse gear control device. Control the 'working speed' and 'movement speed'.

speed

Two forward gears and two reverse gears, high and low speeds

High speed first gear: 0-16.5 km/h Second gear: 16.5-32.5 km/h

Low speed first gear: 0-6 km/h Second gear: 6-12 km/h

Axles and tires

The front and rear axles are specially designed with four jaw wheel reduction axles and flange connected transmissions.

Rear axle swing up and down (± 10 °) tires: 750-16 front four wheels, rear 12-16.5

Brakes

External Disc brake and emergency brake are used for 4 wheels, double circuit air break brake and air break hand brake.

Water supply system

Two sets of water supply systems, large diameter Submersible pump, can be directly injected into the drum or water tank

The internal water is directly injected into the drum through the water tank

Two interconnected water tanks with a total capacity of 280 liters

Visual flow meter, manually controlling the water inflow of the drum.

Mixing and unloading

The double conical drum has a double helical stirring screw and a convex bottom.

Roller geometric capacity: 2810 liters Extended length: 3213 liters


Drum rotation speed: 15 revolutions per minute

The rotation of the drum is achieved through a cycloidal hydraulic motor in the open oil circuit of the gear pump, and there are manual control valves in the operating room and at the rear of the mixer.

The unloading chute is tilted through a manually adjustable handle.


Provide 1 chute extension component as standard configuration.

Equipment hydraulic system

Maximum flow rate: 40/50 liters/minute Maximum pressure: 20MPa MPa

4-piece handle multifunctional joystick.

Aluminum exchanger for cooling hydraulic oil.

Temperature controlled control 55 ° automatic opening of hydraulic cooling device, dual pipeline, two return oil filters, open oil inlet, hydraulic oil filter can be replaced from outside.

loading

The loading arm can be equipped with an automatic weighing sensor, a double acting loading device for lifting and resetting the oil cylinder, and a manually controlled feeding port with standard prompt function.

Capacity: 400 liters Loading times required for each fill: approximately 5 times

Operation room

Enclosed operating room with optional heating/cooling system and sloping front window. Humanized seats, equipped with flexible suspension and height adjustment functions.

Maintenance refueling amount

Fuel tank: 160 liters Hydraulic system total capacity: 160 liters Oil: 13.6 liters

weight

Operating weight: 6200kg

Maximum total weight: 11200kg

Maximum load capacity: 5000kg




Order

*
*
0534-5621500