diesel engine

Model: YCD4T22T-105 Total displacement - Number of cylinders: 3800 milliliters -4-cylinder inline

Injection: direct injection, mechanically controlled cooling: water cooling, dry air filter

Maximum power: 78 kW (105 horsepower) Maximum torque: 280 Nm 2400 rpm

electrical system

Generator: 28V-750WA100AH (550A) Battery: 2 * 12V-60AH (272A)

turn

Two wheel steering, assisted by a dual displacement load sensing power steering system on both steering wheels. Articulated steering.

4 * 4 Four-wheel drive

Torque converter gearbox, open hydraulic gear pump, reverse gear control device. Control the 'working speed' and 'movement speed'.

speed

Two forward gears and two reverse gears, high and low speeds

High speed first gear: 0-17 km/h Second gear: 17-33 km/h

Low speed first gear: 0-6 km/h Second gear: 6-12 km/h

Axles and tires

The front and rear axles are specially designed with large four jaw wheel reduction axles and flange connected gearboxes.

Rear axle swing up and down (± 10 °) tires: 16/70-20

Brakes

External Disc brake and emergency brake are used for 4 wheels, double circuit air break brake and air break hand brake.

Water supply system

Two sets of water supply systems, large diameter Submersible pump, can be directly injected into the drum or water tank

The internal water is directly injected into the drum through the water tank

Two interconnected water tanks with a total capacity of 532 liters

Visual flow meter, manually controlling the water inflow of the drum

Mixing and unloading

The double conical drum has a double helical stirring screw and a convex bottom.

Geometric capacity of drum: 4248 liters

Drum rotation speed: 15 revolutions per minute

The rotation of the drum is achieved through a cycloidal hydraulic motor in the open oil circuit of the gear pump, and there are manual control valves in the operating room and at the rear of the mixer.

The unloading chute is equipped with a manual adjustable handle to control the tilt as standard, providing one chute extension component.

Equipment hydraulic system

Maximum flow rate: 40/63 liters/minute Maximum pressure: 20MPa MPa

4-piece handle multifunctional joystick.

Aluminum exchanger, used to cool hydraulic oil, temperature controlled control 55 ° automatic opening of hydraulic cooling device, dual pipeline, two return oil filters, open inlet oil, hydraulic oil filter can be replaced from outside.

loading

The loading arm can be equipped with an automatic weighing sensor, a double acting loading device for lifting and resetting the oil cylinder, and a manually controlled feeding port with standard prompt function

Capacity: 500 liters Loading times required for each fill: approximately 5 times

Operation room

Enclosed operating room with optional heating/cooling system and sloping front window. Humanized seats, equipped with flexible suspension and height adjustment functions.

Maintenance refueling amount

Fuel tank: 165 liters Hydraulic system total capacity: 165 liters Oil: 16 liters

weight

Operating weight: 7600kg

Maximum total weight: 15100kg